Suspended Mounting Clip

Share on facebook
Share on twitter
Share on linkedin

Step 1: Mount the attachment of cable couplers to the ceiling with sufficient load-carrying capacity and tighten them with screws.
Step2: Thread the stainless steel wire through the male screw of cable couplers and then connect to the mounted attachment of cable couplers
Step 3: Insert the screw into the serrated aluminum profile to lock with the cable gripper sliding from the bottom slot of serrated aluminum profile.
Step 4: Thread the stainless steel wire through the bushing of cable gripper.
Step 5: Fix the light into the aluminum profile.
Step 6: Adjust the length of stainless steel wires to the desired height. Tighten the coupling nut and cut or roll up the excess stainless steel wires after the power-on test.

CONTACT US

Email: info@clearlighting.com

Office
Tel: 86-0755-86114338
Add: #901, Block B (south area), Zhuoyue Meilin Centre Plaza, Futian District, Shenzhen, China

Factory
Tel: 86-0752-3911602
Add: CLEAR Industrial Park, Tiantou Village, Shatian Town, Huiyang District, Huizhou, China